Details | |
|---|---|
| Materials |
|
| Saw type |
|
| Areas of application |
|
| Height (cm) |
|
| Width (cm) |
|
| Length (cm) |
|
| Voltage (V) |
|
Key Features
adjustable angle stop for sawing at different angles mitre sawing up to 45° available with a low-noise saw blade
Prices excl. 21% VAT and cover the following fixed costs: rental price and statutory premiums/surcharges.
Depending on the use or the chosen product, the following additional costs may be charged: maintenance, fuel, oil, wear and tear, transport, cleaning, accessories and various attachments, any environmental taxes, service fee and surcharges for damage waiver and fire/theft schemes.
If applicable, these costs will be clearly communicated before the agreement is concluded.
If you choose delivery, transportation costs will apply.
Rates are based on daily rates or weekly rates, unless a machine has an hour counter. In this situation, the daily rate is based on 8 operating hours and the weekly rate on 40 operating hours.
A surcharge applies for additional operating hours. The weekend rates (Friday to Monday inclusive) are based on use at the weekend. For more information please check Hiring: how it works.
Optional accessories
These can be selected during the booking process
For Boels machine 11105, 11109, 11137, 11104
- The wear is measured on pick-up and again on return.
- Depending on the diameter and type of blade, a unit price per 0.1 mm applies with a minimum of 0.25 mm. This minimum charge covers part of the logistical costs, the wear, risk of breakage, etc.
- The maximum wear charge per blade is equal to the selling price.
For Boels machine 11105, 11109, 11137, 11104
- The wear is measured on pick-up and again on return.
- Depending on the diameter and type of blade, a unit price per 0.1 mm applies with a minimum of 0.25 mm. This minimum charge covers part of the logistical costs, the wear, risk of breakage, etc.
- The maximum wear charge per blade is equal to the selling price.
- The wear is measured on pick-up and again on return.
- Depending on the diameter and type of blade, a unit price per 0.1 mm applies with a minimum of 0.25 mm. This minimum charge covers part of the logistical costs, the wear, risk of breakage, etc.
- The maximum wear charge per blade is equal to the selling price.